10″ SaferCut
The 10″ SaferCut® is your precision ally for intricate cuts. This compact powerhouse excels in delivering pin-point accuracy with every slice. Featuring responsive PLC controls and our signature safety system, it’s engineered for workshops where space is at a premium but quality is non-negotiable. The 10″ SaferCut®: Where small size meets big performance.
Wheel Spindle Power
3HP
(7.5kW)
20HP
(15kW)
New Wheel Cut Clearance
3.75″
Solids
5"
Shapes
Small Wonder, Big Impact
This nimble machine packs advanced cutting technology into a workshop-friendly footprint. Its rapid-response system minimizes setup time, keeping your projects on schedule. The fine-tuned abrasive wheel delivers clean, precise cuts, making it ideal for detailed work and specialized applications. From prototype development to small-scale production, the 10″ SaferCut® adapts to your evolving needs. Embrace the power of precision in a package that fits your space and exceeds your expectations.
Watch SaferCut® In Action
Features
- Visual real-time cutting-force feedback for operator
- Green-Yellow-Red indicator LED flashes:
- Green: when cut is within available power
- Yellow: when current cut rate is nearing limits of the motor
- Red: when cutting rate is exceeding the rated motor-current limits
- If excessive cutting force continues, saw will automatically shut down to protect operator, wheel, work piece, and the saw itself
- 15 gallon capacity tank is integrated with machine base
- Integrated tank saves precious bench and floor space
- The pump is submerged, making for quieter operation
- The tank has baffles for swarf settling, and with the included wash hose, clean-out is a simple task
- Dual pressure work holding clamp vise
- Low pressure, finger-safe initial clamp pressure with door open
- Once doors close and lock, vise pressure automatically increases to full line pressure to secure workpiece
- Ask us about configuring a part-specific, custom SaferClamp workholding solution!
Specifications
Footprint
34”W x 36”D x 36.5” H [864x915x927mm]
Motor Power and Consumption
3 HP [2.24kW]/3.6 A
Electrical Requirements
480VAC, 3 Phase, 60Hz
Control Voltage
24 VDC
Main Fuse Size
15 A
Wheel Speed/Vc
3450RPM/9,000SFM/45m/s (Wet Config.)
Coolant Tank Capacity
16 gal. [60.5 liters]
Abrasive Wheel Diameter & Arbor
10×1.25in [254x32mm]
Maximum Cutting Capacity
3” [76 mm] Round, 2.5”[64mm] Square
Nominal Work Table Dimensions
14in x 8in [356mm x 200mm]
Compliance
ISO 13849, ANSI B7.1-2010/B11.0-2015, EU
Machinery Directive
Lighting
Diffused LED
Standard Cutoff Wheel Range
Outside Diameter
16” (400 mm)
Width
0.130” (3.25 mm)
Bore
1” (25.4 mm)
